No drawings found.
* Last version maybe changed.

Service Equipment And Supplies Assembly 446-6754 Plate & Film GP(Caterpillar 8A4K general wheel dozer)

Part NO. 446-6754
Name Plate & Film GP
Section Service Equipment And Supplies
Modifier -
SNP WCM IESCN M00893550453
Updated 2018-10-25
Stock China GuangZhou
Accept Payment T/T, Western Union, Alipay, Paypal, L/C
Shipping Method Sea, Air or DHL/FEDEX/TNT/EMS

Caterpillar-Aftermarket.com have excellent quality Guarantee.

CAT 8A4K Service Equipment And Supplies 446-6754 Assembly

446-6754 Plate & Film GP , S/N WCM1-UP, Part OF 430-8323 Plate & Film GP
Model: Caterpillar 8A4K
Catalog: General Wheel Dozer
Section: Service Equipment And Supplies

Grp. Ref. Part NO. Name Modify Note Comments Quantity Maint
7X-3229 7X-3229 FILM-IDENTIFICATION LIFT EYE, TIE-DOWN LOCATION 4 N
118-1225 118-1225 FILM-IDENTIFICATION TRANSMISSION Tank Fill CAP 1 N
134-7258 134-7258 FILM-INFORMATION EXTENDED Life COOLANT 1 N
190-5386 190-5386 FILM-IDENTIFICATION ROUND Red REFLECTIVE 2 N
225-0312 225-0312 FILM-WARNING JUMP START, Read OMM, INTL 2 N
225-4257 225-4257 FILM-WARNING HOT Fluid Under PRESS 2 N
226-1240 226-1240 FILM-WARNING CRUSH HAZARD, Stay BACK, INTL 2 N
226-1274 226-1274 FILM-WARNING CRUSH HAZARD, Read OMM, INTL 1 N
227-7391 227-7391 FILM-WARNING SEAT BELT, INTERNATIONAL 1 N
228-2616 228-2616 FILM-WARNING UNIVERSAL, Read OMM 1 N
236-7227 236-7227 FILM-WARNING PARKING BRAKE, INTERNATIONAL 1 N
340-1111 340-1111 FILM-IDENTIFICATION MAIN Circuit BREAKER 1 N
350-0684 350-0684 FILM-INFORMATION ENGINE OIL, Read OMM 1 N
358-6729 358-6729 FILM-WARNING DOWNGRADE HAULING, Read OMM 1 N
434-5909 434-5909 FILM-IDENTIFICATION TRANSMISSION Oil LEVEL 1 N
438-5434 438-5434 FILM-WARNING DO Not Use ETHER, U.S. 1 N
S: WCM / WCM (1 ~ 99999)
: (1-ON Each Front & Rear Lift & Tiedown EYE) : (ON Near Drawbar PIN) : (ON Electrical Panel Behind Engine Shutoff SWITCH) : (ON Transmission Oil Fill CAP) : (FOR Dozer CONFIGURATION, 2-ON Top Surface Towards Outer Edge OF Tilt Lines Guard Which IS Mounted ON Trunnion ON LH And RH Side OF NON-ENGINE End FRAME. : For Scoop CONFIGURATION, 2-ON Top Surface And Towards Outer Edge OF Guard Which IS Mounted ON Trunnion ON LH And RH Side OF NON-ENGINE End FRAME.) : (ON Underside OF Radiator Fill Cap Access DOOR) : (ON Electrical Panel Below Remote Jump Start TERMINAL) : (ON Rear Outside Surface OF Bumper Towards Outer Edges Centered Vertically ON Flat SURFACE) : (ON Rear Inside Surface OF BUMPER, 200-MM From Inside Surface OF Side Plate & 70-MM From Underside OF Top PLATE) : (1-ON Underside OF Radiator Fill Cap Access DOOR. : 1-ON Top OF Hydraulic Tank Filter COVER) : (ON Sideplate OF NON-ENGINE End FRAME, 360-MM Down From Top OF Stepped Surface 15-MM From Rear OF SIDEPLATE) : (ON LH Sideplate OF NON-ENGINE End FRAME, 230-MM Down From Top OF Stepped Surface 15-MM From Rear OF SIDEPLATE) : (ON LH Front Rops Post Inside CAB) : (ON Inside Cab ON LH Front Rops POST) : (ON Rear OF NON-ENGINE End Frame Above Parking Brake GUARD) : (ON Below Radiator Core Cleaner Access Door Centered HORIZONTALLY(ONE ON Each SIDE)) : (ON 30-MM Forward & 110-MM Down ON LH NON-ENGINE End Frame SIDEPLATE) : (ON Electric Panel Access Door Below Latch ON LH Side OF Radiator GUARD) : (ON Innerside OF LH Hinged Enclosure Door ON Inclined SURFACE) : (1-ON Underside OF Hydraulic Oil Fill Cap Access DOOR. : 1-ON Outer Surface OF RH Platform Next TO Opening For Sight GAUGE) : (ON Inside Electric Panel Over Battery Disconnect SWITCH) : (ON Bracket That Holds High Speed Oil Fill Adapter ON LH Side OF MACHINE) : (ON Front LH Rops Post Inside CAB) : (ON Beside Grease Fittings ON Rear LH Plate OF NON-ENGINE End FRAME) : (ON Inside Electric Panel TO Left OF Circuit Breaker SWITCH) : (ON Innerside OF LH Hinged Enclosure Door ON Inclined SURFACE) : (ON Front Side OF Engine End Frame ON LH Next TO Transmission Sight GAUGE. Align High Line ON Film TO Top Cutout ON Transmission Sight Gauge Plate Mounted TO Engine End FRAME) : (ON Top Face OF Enclosure Towards Front Left Side OF Machine Next TO Precleaner Approx 10-MM From Front Edge And 65-MM From Side Edge OF ENCLOSURE) : : -OR- : (ON LH Side OF Cylinder BLOCK, Towards The Bottom & Rear A: Not Part OF This Group Y: Separate Illustration

*Assembly 446-6754 Plate & Film GP Suitable for 8A4K General Wheel Dozer Service Equipment And Supplies
*Original 446-6754 Assembly contains Regular Invoice included, After-sales service is provided by the official.
*Used 446-6754 Assembly offer Customs Invoice, After-sales service is provided.
*All Taxes included, no more extra fee.
*Shipping country: Asia China SZ / US(depends on local tax rate,effectiveness/tax rate will be prioritized).

Caterpillar-Aftermarket.com have professional services.

Caterpillar-Aftermarket.com global.